Thursday, 24 May 2012

Change Your Ip In Less Then 1 Minute

1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" and hit ok

You should now be at an MSDOS prompt screen.

4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"

You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again

You should now be back to the "Local Area Connection" screen.

15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
tongue.gif 18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address

With a little practice, you can easily get this process down to 15 seconds.

This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back,this is a temporary prevention be careful.......


Block Adds
if you wanna remove those nasty ads from the pages which waste lot of time and bandwidth then here is something for you I believe it will help you a lot,,,

how it works
It's possible to set up a name server as authoritative for any domain you choose, allowing you to specify the DNS records for that domain. You can also configure most computers to be sort of mini-name servers for themselves, so that they check their own DNS records before asking a nameserver. Either way, you get to say what hostname points to what IP address. If you haven't guessed already, the way you block ads it to provide bogus information about the domains we don't want to see - i.e., all those servers out there that dedicate their existence to spewing out banner ads.

The hosts file

Probably the most common way people block ads like this is with something called the "hosts file". The hosts file is a simple list of hostnames and their corresponding IP addresses, which your computer looks at every time you try and contact a previously unknown hostname. If it finds an entry for the computer you're trying to reach, it sets the IP address for that computer to be whatever's in the hosts file. is a special IP address which, to a computer, always means that computer. Any time a machine sends a network request to, it is talking to itself. This is very useful when it comes to blocking ads, because all we have to do is specify the IP address of any ad server to be And to do that, all we have to do is edit the hosts file. What will happen then is something like this:

  1. you visit a web page
  2. the web page contains a banner ad stored on the server ""
  3. your computer says " never heard of it. wait a second, let's see if I've got the number on me..."
  4. your computer finds its hosts file and checks to see if is listed
  5. it finds the hostname, which points to
  6. "great", says the computer, and sends off a request to for the banner ad that's supposed to be on the page
  7. "oh", says the computer, and fails to show anything because it just sent a request to itself for a banner ad

  Where's my hosts file?
  in windows 7/8/vista /C:\Windows\System32\drivers\etc\hosts(open in notepad)
    * Windows 95 / 98 / ME: C:\Windows (I think)
    * Windows NT: C:\WinNT\hosts
    * Windows 2000: C:\WinNT\system32\drivers\etc\
    * Windows XP: C:\Windows\System32\drivers\etc
    * FreeBSD / Linux / Mac OS X / Unixish operating systems: /etc/hosts
    * Classic Mac OS: please read this helpful information submitted by David "iNerd" B
    * Mac OS 9: Marcia Skidmore sent in details that hopefully explain what you need to know

The format of the hosts file is very simple - IP address, whitespace, then a list of hostnames (except for older Macs; please see above). However, you don't need to know anything about the format if you don't want to as you can just view the list hosts file.

Of course, that's not the only way to use the list, but it's probably the most simple for most people.

here is the hosts list which are serving you the ads just append it to your hosts file and enjoy ad free surfing makes things faster. if you want ad from certain site then just remove it from the list below.